top of page
Safety Reflect Logo.png

When visibility at night and safety is the biggest concern trust


When the Logos, numbers and letters on your back must have the ultimate Illumination under any safety conditions. That is where you will want to use our Safety Reflective Film. Since 1992, a worldwide Industry Benchmark. Nothing comes close, and we guarantee it. Glass beads are the main material to make effect Retro-Reflective product. Our film has a layer on top and is protected by a PET Carrier. Providing the maximum illumination. Easy to cut & weed 145 Micron film with easy tack adhesive liner.

Cutting and Application Instructions:

  1. Note: Check First. Peel away plastic that may be protecting film before cutting.

  2. Make TEST CUT with a 45° blade in a MIRROR IMAGE. Pressure is 130gm.

  3. Weed the excess film media away.

  4. Heat Press 305°F, medium pressure (psi 60) is suitable

  5. Pre-heat garment for 2 second to flatten or take out moisture.

  6. Position the film on the garment and heat for 8 seconds.

  7. Wait 3 seconds and peel away carrier sheet. Warm or Cool.

  8. With Kraft Paper or Teflon sheet, place over image and heat press again 3 sec.




  • Waterproof, durable, flexible and fashionable.

  • Available in 26 Colors.

  • Simple to cut with vinyl cutter or laser.

  • Certified NEPA 1972, 2112, FR120AF, EN 471, Class 2, and Okeo- Tex 100 Class 1.

  • CeWorks with most any fabric, especially moisture wicking polyesters.

  • Clear easy tack adhesive liner for simple weeding and cutting.

Material Specification 

  • Standard width 17.7” inches. Light and dark Colored fabrics. Cottons, 50/50 and more

Additional Information


53 lbs




Black, White, Silver, Red


20" x 1yd, 20" x 5yd, 20" x 10yd, 20" x 25yd, 20" x 55yd

bottom of page