top of page

| PRETREAT

PreTREAT

PreTREATmaker IV

shutterstock_1040558854.jpg
PreTreatmaker IV

The Schulze PRETREATmaker IV is an automatic high-end pretreatment machine for professional high volume customers resulting from consistent refinement and trend insights.

As a novelty the unit is equipped with a multiphase motor (step motor). This Pretreatment Machine does have a total of 4 spray valves which can be individually switched on or off. The maximum spray area is 16″ in width and 24″ in length.

​

The width can be regulated by switching the 4 spray nozzle valves on or off. Therefore the minimal spray width is 4.7 inches – the ideal width for chest prints. The length can be regulated in 0.78 inches intervals. Spraying is possible uni- and bi-directional. This will allow each user to setup the unit according to their needs.

Entry-level model to pretreat textiles for Direct to Garment Printing.

Features

  • Flexible and Consistent Spray Amount Adjustment

  • Flexible and Accurate Spray Length Adjustment: 1 inch to 20 inches

  • 4 Spray Nozzles

  • Spray Area: 16″ x 24″

  • Most Advanced Touch Screen Control

  • Barcode Integration Capability

The Schulze PRETREATmaker IV is available with an optional scale which can be connected to the machine. After each cycle his innovation will show in the display the amount of pretreatment being used. A useful feature to see if nozzles and system are working right. An additional feature is unlocked and will show low volume levels of pretreatment on the display.

Another special feature of the PRETREATmaker IV is its open interface that which can be used to program the unit either directly through the client’s order system or by printing a barcode. This optional feature will simplify and speed up your workflow. With this feature the Schulze PRETREATmaker IV can be operated by untrained staff. Please refer to Barcode_Interface_Instruction_PRETREATmaker_IV_8_2016

​

Schulze PRETREATmaker IV is equipped with our well-known and well-proven automatic cleaning interval function. This feature prevents the nozzles from clogging during daily operation. Flushing of the nozzles with cleaning solution or water is limited to the last 4 inches of tube before the nozzles. This feature saves a lot of pretreatment liquid.

​

Container sizes are: 1 x 10 L Prtreatment, 1 x 5 L Prtreatment, 1 x 5 L Cleaning Solution, 1 x 5 L Waste Tank

GET STARTED TODAY!

Need a sample, product demonstration, or have a question? Contact us today for a free demo on demand!

bottom of page