| HEAT PRESS

Little Red X3D 

Infrared Dryer

shutterstock_1040558854.jpg
Little Red X3D Infrared Dryer
The all-new multi-purpose LittleRed X3D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs.

It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.

New technology speeds curing of ink jet, water-based and discharge inks.

Little Red X3D-30

The Little Red X3-D model is equipped with a 30 in. (76.2 cm) wide conveyor belt and three 24 in. (61 cm) wide infrared heaters (8300W @ 240V total wattage) and can cure 360+ plastisol-printed garments/h, 100+ water-based or discharge-printed garments/h, and up to 50+ garments/h inkjet printed with digital white ink.

Little Red X3D-54

 

The 54 in. (137 cm) wide LittleRed X3-D model cures 720+ plastisol-printed garments/h, 240+ water-based or discharge-printed garments/h, and 100+ garments/h inkjet printed with digital white ink or pretreated for DTG printing.

FLEXIBLE
Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time

POWERFUL
8300W@240V total wattage

DEPENDABLE
Industry-leading 15-year heater warranty

EFFICIENT
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing
 

CONSISTENT
Low friction belt aligner and DC belt speed control with digital display

HEAVY DUTY
"X-Series" Conveyor Belt Tracking System with Teflon coated fiberglass belt

FAST

  • 360+ garments/hr for plastisol inks

  • 100+ garments/hr for water-based or discharge inks

  • 51+ garments/hr for DTG digital white ink @ 3 minutes

  • 38+ garments/hr for DTG digital white ink @ 4 minutes

 

ACCURATE
Digital PID Temperature controller is accurate to +/-1°F

ADJUSTABLE
2 - 7 in. (5 - 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater

EXPANDABLE
Add 24 in. (61 cm) chambers and/or 18 in. (46 cm) belt extensions

OPTIONS

  • Additional heating chambers and conveyor belt extensions

  • Heavy duty belt motor (recommend for longer conveyor belts)

  • Locking casters for mobility

GET STARTED TODAY!

Need a sample, product demonstration, or have a question? Contact us today for a free demo on demand!